High Technology lifestyle
The Advantages of Stainless Steel Ball Valves
The main advantages of stainless steel ball valve are the following seven points:
1. Stainless steel ball valve of the fluid resistance is small, the resistance coefficient of the ball valve with the same length of the pipe section.
2. Sanitary ball valve structure is relatively simple, small size, light weight.
3. Tight and reliable, good sealing, the vacuum system has also been widely used.
4. Sanitary fast ball valve is easy to operate, open and close quickly, from full open to full close as long as the rotation 90 °, easy remote control.
5. Sanitary valves are featured by easy maintenance, simple structure, seals are generally active, the demolition of replacement are more convenient.
6. In the fully open or fully closed, the ball and the valve seat sealing surface and medium isolation, through the media , it will not cause corrosion of the valve sealing surface.
7. It is applicable to a wide range from small to a few millimeters in diameter, large to a few meters, from high vacuum to high pressure can be applied.
Oznake: Sanitary ball valves
20.12.2016. u 09:46 | 0 Komentara | Print | # | ^Security Risks of Stainless Steel Pipe Fittings
New steel explosion introduced security risks fuse of sanitary stainless steel pipe fittings
Although the steel-making boiler incident with our sanitary fittings industry is very different, but the security issues of sanitary pipe fittings industry can not be underestimated, last year, we purchased a new wire cutting machine, because of unskilled workers, when operated improper and cut health-class pipe, small accidents occurred, so all the time safe of sanitary pipe fittings is the alarm.
Real estate reform is a permanent wait, if you really want to stabilize the investment rate is no longer continue to rise, the economic growth rate may decline sharply, unless the consumer growth rate and export growth rate to rise sharply to offset the negative impact of falling investment, it is very Difficult to do.
China's investment rate this year may also continue to rise, investment growth higher than last year. Although investment growth can sustain economic growth, but also means that China's economic structure further deteriorated, and then think about the stability of the investment rate is even more difficult. Exports in the first two months of this year were better, but import growth slowed. The Chinese health-grade pipe fittings economic rebound compared with the previous weak. The government is more afraid of asset bubbles, inflation, the central bank's policy is relatively tight monetary policy.
Oznake: pipe fittings
09.12.2016. u 09:15 | 0 Komentara | Print | # | ^Sanitary butterfly valve in the pharmaceutical industry
Sanitary butterfly valve in the pharmaceutical industry
Using pure water for process water requirements
Health-class butterfly valve: pharmaceutical water manufacturers mainly refers to the production process in the bottle, ingredients and other processes, the production of refined drugs, washing and other processes used in water.
The designation of water should be avoided in relation to the manufacturing process of water, such as deionized water, demineralised water, distilled water, especially the process of manufacturing water is de-linked from its name, but water is categorized from the point of view of chemical and microbiological properties, the Chinese Pharmacopoeia provides purified water can be obtained in three different ways.
Water injection is generally purified and obtained by distillation (also reverse osmosis and ultrafiltration method), the chemical purity is up to 99.999%, no pyrogen. The process of preparing pure steam is the same as the preparing water for injection using distilled water, and the same multi-effect distilled water machine or pure steam generator alone can be used, so pure steam is discussed together with water for injection.
1 recommended process
Sanitary butterfly valves are in the pharmaceutical use of purified water purification process
Raw water ’ raw water booster pump ’ multi-media filter ’ activated carbon filter ’ water softener ’ precision filter ’ first stage reverse osmosis ’ PH regulator ’ middle water tank ’ second stage reverse osmosis ’ purified water tank ’ transfer pump ’ ultraviolet ray Sterilizer ’ Microporous filter ’ Water point
2 traditional process
Raw water ’ raw water booster pump ’ multi-media filter ’ activated carbon filter ’ water softener ’ precision filter ’ first stage reverse osmosis ’ middle water tank ’ middle water pump ’ ion exchange equipment ’ purified water tank ’ transfer pump ’ ultraviolet disinfection ’ Microporous filter ’ water point
3 latest technology
Raw water ’ raw water booster pump ’ multi-media filter ’ activated carbon filter ’ water softener ’ precision filter ’ first stage reverse osmosis ’ middle water tank ’ intermediate water pump ’ EDI equipment ’ purified water tank ’ transfer pump ’ ultraviolet sterilizer ’ micro Hole filter ’ water point
Oznake: Sanitary butterfly valves
09.12.2016. u 09:03 | 0 Komentara | Print | # | ^Sanitary Valve Factory Strategic Customer
Sanitary valve factory strategic customer cooperation "can not be met!"
Sanitary valve factory are in the search for customers, I generally think so, according to the ratio of 3:5:2, to match the ratio of their customers, simply say, is 30% of the intrinsic value of customers, 50% of the external value of customers, 20 % Of the value of strategic cooperation customers, although we adjust the proportion, but often the proportion is 20%, we still are difficult to achieve, because our current sanitary valve factory, our size and process stability is difficult to maintain a long-term competitive advantage.
In general, I still hope that the sanitary valve factory are in some customer cooperation, as far as possible to achieving the strategic value, we hope that we have excellent value creation, the sanitary valve factory has enough big impetus, and gradually form the core competitiveness of the factory, so that the company's production, sales and other aspects need to improve from the quantitative change to qualitative change, so the sanitary valve factory gradually grow and develop.
In the process of cooperation with the strategic, health-level valve supply and demand sides rarely concerned about who supply, who needs, but concerned about the prosperity of everyone, a loss of both the interests of the chain, because the value is not created by the sanitary valve Plant, nor is health-valve customers, the supply chain is in all the relevant parties to work together, so the sanitary valve factory is in the search for strategic value of the customer.
Oznake: sanitary valve
09.12.2016. u 08:23 | 0 Komentara | Print | # | ^
