Fiber Optics Solutions

četvrtak, 02.07.2015.

SFP modules: These Informations You Should Know

As the technology and market of optical transceivers continue to mature, SFP transceivers are now widely used in optical transmission solutions. These SFP modules are hot-swappable, which is highly helpful to designers in the Telecommunication industry. SFP transceiver is one of the most dependable device in optical transmission systems because the designs are based on a multi-source agreement (MSA) and are a pluggable form of SFF. Except these helpful information, here are some things you need to know about SFP transceiver modules.

The Applications of SFP Transceivers

SFP transceivers can support fiber networking standards such as Gigabit Ethernet, Fiber Channel and SONET. They also support a variety of other optical transmission systems as well. A compact and hot-swappable SFP transceiver can be used in all kinds of optical transmissions and telecommunications applications. These SFP Optics will connect a switch, router, or other network device. Most SFP transceivers can be found in popular networking systems such as Wide Area Networks (WANs), Metro Access Network, and Metro Core Network.

Types of SFP Transceivers

SFP transceivers are able to provide an excellent amount of variation to consumers. They have a various different transmitters and receivers types, allowing users to decide on the appropriate SFP transceiver for each link to offer the required optical reach over the available multi-mode fiber (MMF) or single-mode fiber (SMF).

The SFP module is usually offered in five different categories, including T, SX, LX, ZX, and DWDM. Take HP SFP module as example:

• for Copper Networks
  
  JD089B and J8177C: operate on standard Category 5 unshielded twisted-pair copper cabling of link lengths up to 100 m


• for multi-mode fiber
  
  J4858C and JD118B: 850 nm, for a maximum of 550 m at 1.25 Gbit/s (gigabit Ethernet)


• for single-mode fiber
  
  J4859C: 1310 nm, for distances up to 10 km
  
  JD061A and JD062A: 1310 nm, for distances up to 40 km
  
  JD091A and J4860C: 1550 nm, for distances up to 80 km

Each one of these different kinds interface with copper cables and this permits the motherboard to communicate with the unshielded twisted pair (UTP). CWDM cables and single-mode bi-directional fiber optic cables will transmit data both upstream and downstream.

The Benefits of an SFP Transceiver

SFP transceivers are hot-swappable devices, that is to say that these SFP optics are compatible with many other devices including discrete components. They are also compatible to multiple setups across both fiber optic and copper channels. Whether you need both long or short distance communication, SFP transceivers can help.

Digital optical monitoring (DOM) is based upon the new and modern optical transceiver design. Consumers have the ability to monitor real-time parameters of the SFP. Optical inputs and output power, laser bias, and supply voltage will allow designers to monitor real-time.

Do not forget that an SFP cage may be needed for proper operation of the device. It’s usually mounted to the PCB board and will accept the transceiver. It eliminates extra manufacturing steps and reduces costs. SFP transceivers also have a higher optical reliability and will permit higher soldering temperatures. SFP transceivers are recommended by fiber optic component providers to ensure proper data transmission.

Related Recommendation

Fiberstore, the leading manufacturer and supplier of compatible fiber optic transceiver modules, has achieved a breakthrough in HP compatible transceiver modules and successfully commercialized. Not only SFP SX, SFP LX but also 10G SR SFP, 10G LR SFP transceiver, CWDM SFP+ transceiver modules are available now.

Oznake: SFP module, J4858C, J4859C, J8177C, JD118B, 10G LR SFP

srijeda, 25.03.2015.

HP X121 1G SFP LC Transceivers Overview

HP X121 1G SFP LC Transceiver Models

• HP J4858C 1000BASE-SX SFP 850nm 550m LC Transceiver


• HP J4859C 1000BASE-LX SFP 1310nm 10km LC Transceiver


• HP J4860C 1000BASE-LH SFP 1550nm 70km LC Transceiver

HP X121 1G SFP LC SX Transceiver (J4858C)

HP J4858C - 1000BASE SX transceiver that provides a full-duplex Gigabit solution up to 550 m on multimode fiber.

• Ports: 1 LC 1000BASE-SX port; Duplex: full only


• Wavelength: 850nm


• Cable length: 2-550m


• Cabling Type: 2.5/125 Ľm or 50/125 Ľm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively


• Maximum distance:
  2-220 m (62.5 Ľm core diameter, 160 MHz*km bandwidth)
  
  2-275 m (62.5 Ľm core diameter, 200 MHz*km bandwidth)
  
  2-500 m (50 Ľm core diameter, 400 MHz*km bandwidth)
  
  2-550 m (50 Ľm core diameter, 500 MHz*km bandwidth)

HP X121 1G SFP LC LX Transceiver (J4859C)

HP J4859C - 1000BASE SFP LC LX Transceiver: An SFP format gigabit transceiver with LC connectors using LX technology.

• Wavelength: 1310nm


• Ports: 1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX); Duplex: full only


• Cabling Type: Either single mode or multimode; 62.5/125 Ľm or 50/125 Ľm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively; Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1;


• Maximum distance:
  2-550 m (multimode 62.5 Ľm core diameter, 500 MHz*km bandwidth)
  
  2-550 m (multimode 50 Ľm core diameter, 400 MHz*km bandwidth)
  
  2-550 m (multimode 50 Ľm core diameter, 500 MHz*km bandwidth)
  
  2-10,000 m (single-mode fiber)


• Note: A mode conditioning patch cord may be needed in some multimode fiber installations.
  
  

HP X121 1G SFP LC LH Transceiver (J4860C)

HP J4860C - Gigabit LH transceiver that provides a full-duplex Gigabit solution up to 70 km on single-mode fiber.

• Wavelength: 1550nm


• Ports: 1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics); Duplex: full only


• Cable type: Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1;


• Maximum distance: 10-70,000 m (single-mode fiber)


• Note:
  Power consumption is 0.8 watts typical with 1 watt maximum at 100% utilization.
  
  For distances less than 20 km, a 10 dB attenuator must be used.
  
  For distances between 20 km and 40 km, a 5 dB attenuator must be used.
  
  Attenuators can be purchased from most cable vendors.

OEM Manufacturer

HP SFP transceivers offered by Fiberstore are third-party optical modules certified fully compatible with HP Switches & Routers. The HP SFP modules can be mixed and deployed with HP OEM SFP transceivers for seamless network performance and interoperability. Fiberstore provides HP compatible SFP transceivers which can be equivalent to HP JD118B, HP JD092B, HP JD089B, HP J9143B, HP J8177C, etc.

Oznake: HP SFP, J4859C, J4858C, JD118B

petak, 06.02.2015.

FAQs about HP Mini-GBIC and SFP Transceivers

Q: Which ProCurve Mini-GBICs and SFPs are supported in which ProCurve products?

The ProCurve Networking Mini-GBIC Support Matrix specifies which Mini-GBICs and SFPs are compatible with which ProCurve products. General rules are:

• Only genuine HP Mini-GBICs and SFPs are consistent with HP products.


• The J8177B/C 1000Base-T Mini-GBIC is not supported in "dual personality" ports (which already include a gigabit copper LAN port).


• Newer ProCurve / ProVision products require revision "B" or later Mini-GBICs and SFPs (product number ends with the letter "B" or later, for example J4858B, J4859C).

Q: Are the "revision C" Mini-GBICs (J4858C, J4859C, J4860C) supported in all products that support the "Revision B" (J4858B, J4859B, J4860B) Mini-GBICs?

Yes, the "revision C" Mini-GBICs (J4858C, J4859C, J4860C) are supported in all ProCurve / ProVision products that support Mini-GBICs.

Q: Can I mix and match "B" and "C" mini-GBICs in a ProCurve switch?

Yes, "Revision B" and "Revision C" mini-GBICs can be used together in any ProCurve switch that supports mini-GBICs.

Q: Are the Mini-GBICs and SFPs hot-swappable?

Yes, all HP Mini-GBICs and SFPs are hot-swappable (they can be installed and removed while the switch is powered on). However, the network cable should be disconnected before removing the Mini-GBIC or SFP from the switch.

Best practice tip: After inserting a transceiver into a ProCurve / ProVision switch, the Mode LED will come on for two seconds while the transceiver is initialized. Do not remove the transceiver until the Mode LED has turned off. For the Switch 2600 and 2800 Series: After inserting a transceiver into a 2600 or 2800 switch, the "M" LED will come on to indicate that the mini-GBIC slot is active. Wait at least two seconds after the "M" LED comes on if you need to remove the transceiver.

Q: Which HP Mini-GBICs and SFPs are RoHS compliant?

All currently-shipping HP Mini-GBICs and SFPs are RoHS compliant. This includes:

• J4858C HP X121 1G SFP LC SX Transceiver


• J4859C HP X121 1G SFP LC LX Transceiver


• J4860C HP X121 1G SFP LC LH Transceiver


• J8177C HP X121 1G SFP RJ45 T Transceiver


• J9054C HP X111 100M SFP LC FX Transceiver


• J9099B HP X112 100M SFP LC BX-D Transceiver


• J9100B HP X112 100M SFP LC BX-U Transceiver


• J9142B HP X122 1G SFP LC BX-D Transceiver


• J9143B HP X122 1G SFP LC BX-U Transceiver

Q: When should I use the "auto-100" setting for my J8177C gigabit-copper Mini-GBIC?

The J8177C "auto-100" setting is helpful in connecting an 8200zl or 5400zl switch to an Avaya Cajun switch or Avaya G700 Media Gateway (PBX), which operate at 100 Mbps and send non-standard Ethernet preambles. Because of the non-standard preamble, those Avaya products send packets that the Switch zl 10/100/1000-T ports do not recognize. With the "auto-100" setting, the J8177C will operate at 100 Mbps, will auto negotiate the duplex and flow control, and will accept the non-standard packets. (NOTE: The "auto-100" setting can be used for only J8177C products, not for the J8177B.)

Q: What products do not support the J8177C but do support the J8177B?

The 9300m and 9400sl products do not support the J8177C version. Other than the 9300m and 9400sl products all other products that support the J8177B version will support the J8177C version.

Q: Where to buy compatible HP Mini-GBIC and SFP transceivers?

Fiberstore is a professional OEM manufacturer and supplier of optical networking solutions. They can supply 100% compatible HP Mini-GBIC and SFP transceivers, such as HP J4858C, HP JD119B, etc. According to your requirements, Fiberstore welcome any inquiry for customized fiber optical transceiver.

Reference Documents:

HP SFP Support Center

Oznake: J4859A, J8177C, J4858C, J4858B, HP SFP

petak, 16.01.2015.

Some Knowldege About HP ProCurve Mini-GBICs and SFPs

About HP ProCurve

HP ProCurve was the name of the networking division of Hewlett-Packard from 1998 to 2010 and associated with the products that it sold. The name of the division was changed to HP Networking (also called HP ProCurve Networking) in September 2010 after HP bought 3Com Corporation. As the then-ProCurve division began to offer LAN switches, Core, Datacenter, Distribution, Edge, Web managed and Unmanaged Switches. The ProCurve was also used with Network Management, Routing and Security products. HP ProCurve transceivers as the part of its networking accessories that are applied to their corresponding switches or routers. Today, we will introduce some knowledge of the HP ProCurve Mini-GBICs and SFPs.

Products Involved In This Paper
ProCurve Gigabit-SX-LC Mini-GBIC (Product No. J4858A/J4858B/J4858C)

A small form-factor pluggable 1000BASE-SX SFP with 1LC port that provides a full-duplex Gigabit solution up to 550 m on multimode fiber.

Fiberstore Solution:

• NEW HP J4858A X121 Compatible 1000BASE-SX SFP 850nm 550m Transceiver Module


• NEW HP J4858B X121 Compatible 1000BASE-SX SFP 850nm 550m Transceiver Module


• NEW HP J4858C X121 Compatible 1000BASE-SX SFP 850nm 550m Transceiver Module

ProCurve Gigabit-LX-LC Mini-GBIC (Product No. J4859A/J4859B/J4859C)

An SFP format gigabit transceiver with LC connectors using LX technology.

Fiberstore Solution:

• NEW HP J4859A Compatible 1000BASE-LX SFP 1310nm 10km Transceiver Module


• NEW HP J4859B Compatible 1000BASE-LX SFP 1310nm 10km Transceiver Module


• NEW HP J4859C Compatible 1000BASE-LX SFP 1310nm 10km Transceiver Module

ProCurve Gigabit-LH-LC Mini-GBIC (Product No. J4860A/J4860B/J4860C)

A small form-factor pluggable (SFP) Gigabit LH transceiver that provides a full-duplex Gigabit solution up to 70 km on single-mode fiber.

Fiberstore Solution:

• NEW HP J4860A Compatible 1000BASE-ZX SFP 1550nm 80km Transceiver Module


• NEW HP J4860B Compatible 1000BASE-ZX SFP 1550nm 80km Transceiver Module


• NEW HP J4860C Compatible 1000BASE-ZX SFP 1550nm 80km Transceiver Module

Knowledge You Should Know About HP ProCurve Mini-GBICs and SFPs

For the above products, there usually are many questions about them. The following infomation will make you to know more about them.

Supported Platform
According to HP ProCurve Networking Mini-GBIC Support Matrix, we can easily find out which Mini-GBICs and SFPs are supported on which ProCurve Systems. General rules are:

• Please use only genuine or high-quality 100% compatible ProCurve Mini-GBICs and SFPs on ProCurve System.


• Newer ProCurve products require revision "B" or later Mini-GBICs and SFPs (product number ends with the letter "B" or later, for example J4858B, J4859C).

About the Version A, B, C

HP ProCurve Mini-GBICs and SFPs have three version, but you may not find A and B anymore in HP's official website. In fact, the version A, B and C are the development of HP ProCurve Mini-GBIC and SFP. Though there is no big difference between these three version, some improvement will be added in the newest version, and the supported platforms adjustment. The "revision C" Mini-GBICs (eg. J4858C, J4859C, J4860C) are supported in all ProCurve products that support Mini-GBICs. In addition, "revision B" and "revision C" mini-GBICs can be used together in any ProCurve switch that supports mini-GBICs. Actually, as the transitional products, HP stops offering the version A and version B. But version C are not supported on some old switches, thus, some users have still used the version A or version B. Fiberstore can support the 100% compatible HP ProCurve Mini-GBICs and SFPs at version A, B and C, such as J4858A/B/C, J4859A/B/C, J4860A/B/C.

Mini-GBICs and SFPs hot-swappable

All ProCurve Mini-GBICs and SFPs are hot-swappable (they can be installed and removed while the switch is powered on). However, the network cable should be disconnected before removing the Mini-GBIC or SFP from the switch.

Best practice tip: After inserting a transceiver into a ProCurve switch, the Mode LED will come on for two seconds while the transceiver is initialized. Do not remove the transceiver until the Mode LED has turned off. For the Switch 2600 and 2800 Series: After inserting a transceiver into a 2600 or 2800 switch, the "M" LED will come on to indicate that the mini-GBIC slot is active. Wait at least two seconds after the "M" LED comes on if you need to remove the transceiver.

About Fiberstore

Fiberstore is a professional manufacturer and supplier of optical networking solutions. We can supply 100% compatible fiber optic transceiver modules of many brands, like HP, Cisco, Dell, D-link etc. with a incredible discount. About HP, you can find a full product line of our New HP transceivers with a good price and enjoy same-day shipping. In addition, according to your requirements, we welcome any inquiry for customized fiber optical transceiver. Fiberstore's aim is offering the best quality products and perfect solutions, saving customers's time and money, making customers enjoy personalization.

Recommendation of The Best-selling Brand Compatible Transceivers

• Cisco SFPs: Cisco GLC-T 1000BASE-T and GLC-SX-MMD


• Netgear SFPs: Netgear AGM731F, AGM731F 1000BASE SX SFP module


• Juniper SFPs: SFP-1GE-FE-E-T, EX SFP-1GE-SX and Juniper SFP 1000BASE-T


• Finisar SFPs: FCLF-8521-3, FTLF1319P1BTL and Finisar FTRJ8519P1BNL

Article Source: HP SFPs

Oznake: HP SFP, J4858B, J4858C, J4859A, J4859B, J4859C

<	srpanj, 2015
P	U	S	Č	P	S	N
		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	31

Srpanj 2015 (1)
Lipanj 2015 (4)
Svibanj 2015 (3)
Travanj 2015 (13)
Ožujak 2015 (10)
Veljača 2015 (8)
Siječanj 2015 (9)
Prosinac 2014 (4)

Dnevnik.hr
Gol.hr
Zadovoljna.hr
Novaplus.hr
NovaTV.hr
DomaTV.hr
Mojamini.tv