Each end of the blind is clipped into the bracket which you have installed.

The brackets will be installed such that their inner surfaces face each other. Plus, roller blinds easily blend with your personal style in rooms that feature simple, contemporary design or classic, decorative designs. Fortunately, the design of roller window blinds allows them to be easily removed for cleaning or maintenance, and you can even move them if the need arises.

Finally, your roller window blinds should simply clip into place.

Attach your brackets to the window frame which may be constructed of concrete, brick, plaster, wood, or steel. When you're putting up your blinds you'll need a power drill with the correct drill bit, a Phillips screwdriver, a flat-head screwdriver, screws, and a pencil.

Installing Roller Window Blinds

When you're ready to install the blinds, remove the blinds from the packaging and you should find installation instructions and mounting brackets. The first step will be to fit the blind brackets; one of the brackets attaches to the control side of the blind so be sure to attach your blinds in your preferred direction. Before you begin installing your blinds, make sure you have the necessary tools as indicated in the installation instructions. For concrete, brick, or plaster construction, a larger masonry drill bit (~5. Use a pencil to mark the drill holes where you can screw the brackets in place. Installing roller window blinds is also a very manageable task that requires basic tools you can find in most households.

Generally, you can install your blinds in a number of ways, recess fit mounted to the side of the window. Then all you'll have left to do is to sit back, relax, Double Pipe Clamps Manufacturers and enjoy your beautiful new blinds. In any case, installation of roller window blinds is relatively straightforward work. 0mm) will be required; but for wood or steel, you should attach the bracket using a 3. 53300660 recess, recess fit mounted to the top of the window recess, or face fit (outside the window frame). 0mm high-speed steel drill bit. Be careful to measure the blinds and check the brackets are level before attaching them to the window frame. Nevertheless, it is always beneficial to carefully measure and level your brackets before drilling holes into the window frame, as exposed holes are unattractive. With just a few basic tools, you can have your new blinds up an operational in an afternoon or less

Oznake: China M6 Clips Suppliers, Double Thread Screw Manufacturers