Marketing
Xhorse BIM TOOL PRO Fixed BMW Motorcycle Tire Pressure Monitor DTC
When trying the 4D and 8A key programming for BMW motorcycles on Key Tool Plus or VVDI2, we may occasionally meet the DTCs on the screen that cannot be cleared. In case where "Tire Pressure Monitor Malfunction" appears after key programming of BMW motorcycles, we can resolve the problem by VVDI BIMTOOL PRO or BIM TOOL with the following steps.
1. Connect BIMTOOL PRO
Connect BIMTOOL PRO to both the computer & the motorcycle's OBD port.
Launch the BIMTOOL PRO software.
Fxx/Gxx Program/Code >> Auto detect >> Connect car
2. Programming
Click "Vehicle Programming".
Note:
The "target istufen lev" should be the same as the "Shipment date".
If there's no shipment data available, choose the latest date.
40 - FEM[X_SLZ] >> Calculate programming file
We already calculated the new programming file! You also can select another version to program!
Press YES to use the system calculate program version.
The calculation is completed.
Gray areas indicate the current module version information.
Orange areas indicate the programmable version information.
Click "Programming" to proceed.
3. Clear DTCs
After programming is completed, read the vehicle's DTCs and clear them.
Upon clearing the DTCs, verify that the motorcycle screen no longer displays any fault codes.
www.obd2shop.co.uk
Post je objavljen 04.09.2024. u 09:18 sati.