Marketing
Xhorse VVDI Key Tool Plus Add 2017 Audi A8 Key by OBD OK
Xhorse VVDI Key Tool Plus can program a new key for the 2017 Audi A8 by OBD successfully. All it takes is only 3 steps. Just prepare a working key and a new blank key, and let's go.
Step1. Read BCM2 Data
Immo programming >> Audi >> Automatically diagnose models >> Start programming
Identified the Volkswagen/ Audi 5th immo system.
Read BCM2 Data >> OBD identify BCM2 type
Please connect the device to the vehicle OBD!
If you have the car key, please insert the ignition switch or close to the induction coil!
If the key is lost, please turn on the double flash, press the brake a few times, and release it!
BCM2 data has been read out.
The current vehicle has a working key, supports OBD to read BCM2 immo data, and can obtain synchronous data from the vehicle key!
Read by OBD II >> Read BCM2 Data(OBDII)
If you have a working key, insert the key into the ignition switch turn on the instrument, and click OK.
If the key is already in the ignition switch, please pull out and reinsert the working key or turn off and on the start button.
If all keys lost, please turn on the headlights of the car, double flashes, step on the brakes, and click OK.
Press OK to confirm the info.
Reading data success.
Save data file.
Step2. Make Dealer Key
Press "Make Dealer Key".
If you want to prepare an OEM key, make sure the new key supports the change ID(most 3rd part keys do not support this).
If you want to prepare an OEM key, connect the device to the car and switch the ignition ON.
Do you want to prepare an OEM key? (OEM key can enter dealer service shop) No.
A6L, A7, A8, Touareg add key - You must have a working key >> Please input the working key to the device antenna before pressing OK!
Do you want to save the synchronized data? You can prepare a dealer key with synchronized data while losing all key. Yes
Save the data file.
Press OK to load the BCM2 data read in step 1.
Put a key into Key Tool Plus Programmer, then continue.
Writing data, please wait...
Make dealer key success.
Step3. Learn Key
Press "Learn Key".
Please input the number of keys to be learned: 2
Press OK to load the BCM2 data read in step 1.
Insert the working key into the ignition(or nearby ignition coil) and switch it on before continuing.
If lost all working key, insert the dealer key into the ignition(or nearby ignition coil), open the headlight, and step on the brake before continuing.
Insert every key into the ignition in turn.
Once a key is learned successfully, X/Y in the dashboard, X will be added 1.
If only have an ignition coil, please stop and start the "START/STOP" button after X added 1.
Warning: After all key is successfully learned, press the button OK.
All keys were successfully learned.
Test the new key, it can normally work.
Done.
www.xhorse.co.uk
Post je objavljen 20.08.2024. u 11:21 sati.