Marketing
Xhorse VVDI Key Tool MAX Pro Adds 2012 Toyota Vios G Limited Key
Xhorse VVDI Key Tool MAX Pro is equal to Key Tool Max + MINI OBD Tool. As a upgrade version, today I'm gonna try to program a new 2012 Toyota Vios G Limited smart remote with the tool by OBD.
Tools Required
Xhorse Key Tool MAX Pro
Original key
XSTO01EN Universal Smart Key
Procedure
Connect VVDI Key Tool MAX Pro with OBD.
Check original remote, chip: 4D71(40BITS) 433MHz.
Put a CR2032 battery into new remote.
1.Generate Remote
Put the new key into Key Tool MAX Pro signal coil.
Remote program >> Toyota >> 0140 433.92ASK
PCB No. 0140 DST40
Password: 94
Press "Generate remote".
Burn success.
2.Add a Key
Immo programming >> Toyota >> Select by type >> Smart key system >> Type 2(8A/4D+CAN)
Turn ignition on.
Immo programming >> Add key
Switch ignition on.
Registered key: 2
Key to be registered: 5
Keep touching the ignition button with a registered key within 30s after click "OK".
You'll hear a beep once done.
Keep touching the ignition button with a new key within 30s after click "OK".
If key sound once, take it far away;
If key sound twice, it's programmed successfully.
Key detected, keep the key touching ignition switch...
Make sure all steps are completed.
Wait for registration to complete.
Key registration succeeded.
Registered key: 3
Key to be registered: 4
Test the new key.
Its remote works OK, and starts OK.
Done.
Xhorse Key Tool MAX Pro & Toyota 8A/4D/4A smart key can be found on our web: www.xhorse.co.uk
Post je objavljen 16.08.2022. u 10:02 sati.