Marketing
Xhorse VVDI Key Tool Plus Add Toyota Harrier 2016 Smart Key
How to use Xhorse VVDI Key Tool Plus Pad to program a new Toyota Harrier 2016 smart key? Follow the steps below to learn how to do.
This vehicle is Toyota Harrier Hybrid push start.
Prepare a working key & a new key(XM-TOY00GL).
Generate Remote
Put the new PCB into coil.
Connect VVDI Key Tool Plus with OBD2, click
Remote program >> Asia >> TOYOTA >> All remotes >> 2110 312.50_314.00 MHZ dual frequency >> Generate
Just wait for processing, it takes about 1-2 minutes...
At this time, you can see the indicator on PCB is flashing.
Burn success.
Now this PCB has generated to Toyota Harrier 8A chip.
Add Key
IMMO programming >> Asia >> Toyota >> Select by type >> Smart key system >> Type 3(8A/4D+CAN) >> Start programming >> Read the number of keys
Please switch ignition on.
Registered key: 2
Add a key
Please switch ignition on.
Keys can be registered: 5
Keep touching the ignition switch with sign surface of working key, complete the operations within 30s after clicking “OK”.
You’ll hear 1 beep after touching.
Click “OK” and keep touching the ignition switch with sign surface of a new key within 30s.
Note:
If key sound once or no sound, take the key farther away and retry.
If key sound twice, it is program successfully.
Keep key touching ignition switch during the process.
Wait for registration to complete...
Key registration succeeded!
Now you can see, the numbers are changed.
Registered keys: 3
Keys can be registered: 4
Test the remote and start the vehicle, all work!
Done.
This is how to add a key for 2016 Toyota Harrier with Xhorse Key Tool Plus successfully.
www.xhorse.co.uk
Post je objavljen 22.02.2022. u 07:12 sati.