Lonsdor K518ISE Program Range Rover Evoque 2018 AKL via OBD
Using Lonsdor K518ISE to successfully program a Range Rover Evoque 2018 via OBD when all keys lost. You’ll need to open the Lonsdor JLR License firstly. This vehicle is normally very difficult to program. But with K518ISE key programmer, it becomes an incredibly easy way in minutes. No EEPROM, no disassembly.
In this case, you may need a Lonsdor 2015-2018 JLR Specific Key.
Connect K518 programmer with OBD, go into
Immo & Remote >> LAND ROVER >> Select from vehicle >> Land Rover(2015-2018) >> Smart key
*Here’s allowed to select 4 types:
Type 1(FK72)
Type 2(HPLA)
Type 3(write-to-start)
Type 4(program by OBD)
If programming FK72 or HPLA version via OBD, Lonsdor JLR Connector will be in need. Here we just select type 4.
Type 4(program by OBD) >> All smart key lost
Choosing all key lost will delete the original key from system.
New key only supports Lonsdor dedicated key.
Be sure before selecting.
JLR software update works for both FK75 and HPLA versions of KVM system.
Software version: FK72-14C104-AH
Do you have working key for this car?
Select “Cancel” for AKL.
Note: AKL operation will delete all the programmed keys, the unlocked working key can be re-programmed on the current vehicle. For the locked working key, please make sure it can be unlocked before programming. Otherwise, it will be deleted.
Select an key position with ID, press “Generate working key”.
Put the new key into K518 card slot.
Select key type: 1. Lonsdor dedicated key for Jaguar Land Rover.
Generated successfully.
If the vehicle is in alarm state, please press the remote’s UNLOCK button to disarm the alarm.
Test the key.
Key works great, we got a working key now.
Done!
I can’t think of a way that could have been any easier. K518 Programmer took me just a few minutes to reprogram this 2018 Range Rover. No need to do any kinds of EEPROM or take any computers out. No risk of breaking the system. www.obd2shop.co.uk