Speed check internet connection is a very good way to know how your network is working, whether it’s fast or slow, or whether its speed matches the internet plan that you are paying for. Running speed test is so simple and convenient thanks to many speed test tools out there. That’s true. But when it comes to running the tests the right way, it’s not that simple since many factors can affect the accuracy of the test. Let’s take a look at this article, and we will find out a few things that you should not do to ensure the accuracy of the tests. Here we go!e we go!
Speed check internet connection is a very good way to know how your network is working
Speed check internet connection with just a single test
As we mentioned in the introduction, there are different factors being able to interfere with the results of speed tests such as the peak and off-peak hours of the day, the number of users connecting to the network, the testing servers, the device we use to run the tests, and more. In case these factors affect the tests, then its results tend to not reflect accurately the actual speed. That’s why multiple tests matter here. So, you should not speed check internet connection with just a single test.
Split up the connection
Splitting up the internet connection is the next thing that you should not do when testing your network speed. Performing the tests when your internet connection is under heavy use is not good. It will directly affect the accuracy of the test’s results one way or another.
As Wi-Fi signals travel through the air to our devices, its connection strength is interfered with by different factors
Running the test only over the Wi-Fi connection
Due to the fact that the Wi-Fi signals travel through the air to our devices, its connection strength is interfered with by different factors such as the distance to the router, building materials, physical obstacles, wireless interference, and more. If you want to accurately speed check internet connection that you are using, just running the test over the Wi-Fi connection is not enough. Instead, you should run the test over both the wired connection and the wireless connection to see the difference between them. Normally, the wired connection speed is higher than the wireless connection speed.
Not close unnecessary applications and programs running on the background of the test device
If unnecessary applications and programs, particularly the bandwidth-consuming ones like Netflix, online games, etc, run on the background of your test device at the same time when you are testing the connection speed, then the accuracy of the test results will not be highly ensured. Due to that, you should close unnecessary applications or programs running on the test device’s background before the test.
Running your speed tests on older devices
If you choose to run your speed test on older computers or older phones, for example, then you will not likely receive an accurate measurement of your full internet speed due to their hardware. That is the reason why you should choose to speed check internet connection using newer devices instead of aged devices.
The performance of your Wi-Fi connection depends a lot on the router
Not notice the router position
Your Wi-Fi signal originates from the router. So, the performance of your Wi-Fi connection depends a lot on the router. Factors like the router location, the distance, as well as physical obstacles between the router and your devices can all affect your speed results’ accuracy. If you want to fully measure your speed check wifi, you should do the tests in the same room as your router.
Conclusion
Here are some things you should not do when speed check internet connection. As there are different factors affecting the speed test’s accuracy, by not doing things mentioned above, you will get more accurate and complete measurements about your connection performance. Hope that this article provided you with useful and interesting information.
>>> More: Speed Check: Working from home. How much speed do you need?
Post je objavljen 01.10.2020. u 05:10 sati.