Wiring a Doorbell Transformer
You take the second lead and that is the red wire that was in that base you take that second lead and land it on the other one. Tipp: , damit Sie diesen Vorgang nicht auf allen Geräten einzeln durchführen müssen. Bellwire Bell wire is the wire that connects the doorbell button to transformer.
It did, as long as I kept my finger on the button. Wie Daten Ihre Werbeerlebnisse verbessern Wir möchten Ihnen mit unseren Produkten beste Erfahrungen bieten.
Wiring a Doorbell Transformer - Step 3 — Wiring the New Transformer Once the old transformer is out then you can install the new transformer.
This is how I was thinking about setting up the first floor doorbell just by tying it in. If I push the front door switch it sends the 16v to both doorbells. If I transformer the side door switch it also sends the 16v to both doorbells. Also would sending the 16v directly to the doorbell and using the switches as the return to the transformer work as well just flip flop the + and - as I now have them? That last trasnformer has it correct. What I was getting at is at the button you don't have both the switched hot and the return. Exactly where the wires make contact don't matter. But you want to keep the two hot and return too the 2nd bell together. This is not an electrical requirment not at the voltage and current levels used for a door bell. But it gets very confusing to anybody that runs across this in the future is you have a single wire from the doorbell to the button to the bell and to the transformer. Now clearly those are at the orginal door bell. For low voltage transformer circuit unlike 120 volt circuits it does not matter which lead of the hook the switch hooj in.