Dating snap on wrenches
An early example of this model can be seen as the. The next group of figures will show examples of the standard-length combination wrenches.
If you do want to restore it there are two or three ideas - You can sand blast, solvent dip or chemically strip the box. The box-end of the wrench uses the unique Flank Drive system to grip the sides of bolts and not the corners for tightening and loosening even the most rounded bolts.
Snap-on Wrench - In addition, the markings are stamped on the opposite side of the wrench, so that the wrench is oriented with the smaller opening to the left.
Alloy Artifacts Web Search Snap-on Wrenches Dating its inception in 1923 through to the late 1940s, the Blue-Point brand had accounted for virtually all of the wrenches sold by Snap-on. The Blue Point Tool Company had been created originally so that Snap-on could expand its product line, while keeping the Snap-on brand focussed primarily on sockets and drive tools. By the late 1940s this arrangement had worked very well for more than two decades. During this period the Snap-on and Blue Point trademarks had functioned as co-equal brands, with no suggestion that Blue Point tools were lesser or cheaper in any way. Actually, since there was no real overlap in the tools offered under each brand, direct comparisons were not possible. This was strictly a change of the brand markings, as there was no apparent change to the specifications, model numbers, or pricing of the wrenches. The overall length is 10. The finish is polished chrome, with some loss visible due to wear. This wrench is very similar to the shown earlier, with the only substantial difference being the fully polished chrome finish. The snap length is 11. The finish is polished chrome, with extensive losses due to rust and pitting. This wrench is very similar to the shown earlier, with the only substantial difference being the fully polished chrome finish. The overall length is 14. The finish is polished wrenches with some loss due to rust. The overall length is 6. The overall length is 6. This wrench is basically identical to the shown in an earlier section. The inset has been rotated for readability. The overall length is 5.