Marketing
Vident iLink400 VOLVO XC90 2006-2016 Diagnostics: Confirmed!
Confirmed! The customized auto diagnostic tool Vident iLink400 is verified to work for VOLVO XC90 the year 2006-2016:
Abilities confirmed to work well:
read ECU information: confirmed!
read and clear fault codes: confirmed!
freeze frame: confirmed!
perform active test: confirmed!
special functions: confirmed!
FYI, some functions “yes or no” depends on models.
Vident iLink400 VOLVO XC90:
Vident iLink400 reader Special Functions:
http://www.chinacardiags.com/upload/pro/vident_ilink400_full_system_volvo_function_list.xlsx
1
Readiness code
2
Adaptation of the throttle unit
3
Quick test of exhaust camshaft control
4
Quick test of intake camshaft control
5
Quick test of the fuel pump (FP)
6
Quick test of the fuel tank system (USA/CDN)
7
Programming optimizing parameters
8
Activating TEST MODE
9
Control module adaption
10
Reset adaptation to zero
11
Resetting the counter for-Gearbox oil change
12
Resetting adaptation
13
Calibration of gear position sensor
14
Resetting the oil counter
15
Calibration the system
16
Calibrating the occupant weight sensor(OWS)
17
Configuring the number of seats
18
Storing the ID number for the occupant weightsensor (OWS)
19
Activating and reading off sun roof parameters
20
Add or Remove remote controls
21
Programming the control unit
22
Configuration of the siren
23
Replacing the control module
24
Reading the programmed values
25
Quick test of the tire pressure sensor
26
Logging detailed diagnostic data
27
Reading data for vehicle configuration
28
Programming the control module, centralelectronic module(CEM)
29
Quick test of alternator fuction
30
Resetting factory settings
31
Resetting low voltage counters
32
Resetting car
33
Testing all displays and lamps in instrument
34
Programming the audible acknowledgementsignal, seat belt reminder
35
Programming the driver information module(DIM)
36
Reading off programmed values
37
Resetting the service reminder indicator(SRI)
38
Resetting the carphone code
39
Caibrating the position sensor for Bi-Xenonlamps
40
Reading off the alarm cause
41
Programming the climate control module (CCM)
42
Checking LIN bus
43
Reading off programmed parameters
44
Identifying the Damper Motor Module (DMM)
45
Programming the additional and parking heater
46
Initializing the window position
47
Programming soft stop
48
Programming the remote control setting
49
Checking current values
50
Quick test of the fuel tank system
51
Programming the control module
52
Installing/removing key
53
Read-out of programmed values in driver information module (DIM)
54
Reading off static data
55
Calibrating the Bi-Xenon lamp position sensor
56
Self-adjustment of damper motor end stops
57
Adjusting parameter, ECC
58
Read-out of programmed values in driver information module
59
Window position set-up
60
Programming the seat temperature
61
Calibration(DSTC)
62
Checking brake light switch adjustment
63
Calibration
64
Reading the user information
65
Activating/deactivating Volvo on Call
66
Volvo On Call service check
67
Reinstalling the spare battery
68
Calibrating the system
69
Add or Remove key
70
Resetting the SRL (Service Reminder Lamp) to
71
Program functionality
72
Pzerorgoramming combined instrument panel
73
Reading off programmed values in the combined instrument panel
74
Add/Erase keys
75
Erase the VIN code
76
Initiate immobilizer control module
77
Programming lock type
78
Programming new control module
79
Pragramming remote control
80
Checking the number of remote controls
81
Reading off the programmed values
82
Reading the static data
83
System test
84
Programming the ECC control module
85
Self-adjusting of shutter motor end position
86
Updating the electronic climate control module (ECC)
87
Resetting "Transmission oil replacement" counter
88
Readiness code (USA/CDN)
89
Reading off the diagnostic operating cycle
90
Programming fuel pump (FP) start diesel
91
Programming the idle speed
92
Check and adjust dynamic pump setting
93
Quick fuel tank system test
94
IUMPR read out (USA/CDN)
95
Testing the fuel pump (FP)
96
Programming the optimizing parameters
97
Adaptation of the exhaust gas recirculation (EGR) valve
98
Combustion of soot particles
99
Resetting the odometer particle trap
100
Resetting the adaptation values
101
Reading off the configuration
102
Programming of global opening/closing of windows
103
Testing all displays and lamps in the driver information module (DIM)
104
Indicates programmed values
105
Programming the infotainment control module(ICM)
106
Programming customer parameters
107
Calibration (cars with DSTC)
108
Calibration of the climate control module(CCM)
109
Programming remote control setting
110
Calibration of position sensor, GDL lamps
111
Calibration of position sensor
112
Resetting counter oil
113
Reading off VIN LEARNED
114
Programming a new control module
115
Programming the cruise control
116
Programming a new control unit
117
Positioning of accelerator pedal sensor
118
Continuous variable valve timing (CVVT) test
119
Activating the DSA warning lamp
120
Activating torque reduction
121
Modify the settings in the combined instrument panel
122
Programming the outside temperature display
123
Programming the trip computer function
124
Programming a new combined instrument panel
125
Resetting the mileage, new car
126
Resetting the service reminder lamp(SRL)
127
Calibrating the control module
128
Programming the alarm function
129
Programming the remote control function
130
Resetting the Transmission fluid change
131
Resetting the adaptation
132
Pcorougnrtaemrming the climate control module
133
Self-adjustment of damper motor end positions
134
Idling speed adjustment
135
Positioning the throttle position sensor
136
Activating self-adjustment
137
Updating the climate control module
138
Updating the combined instrument panel for diesel engines
139
Reading cause of alarms
140
Programming and calibration
141
Installing low beam reduction US/CDN
142
Programming the control module, central electronic module(CEM) US/CDN
143
Programming the combined instrument panel
144
Accumulator draining
145
Action for falling temperature and cold draught in passenger compartment
146
Activating components
147
Activating components and functions
148
Activating components/functions
149
Activating fuel pump in tank
150
Activating gear indication
151
Activating heating coil, FSM
152
Activating line pressure solenoid STH
153
Activating steering wheel heating
154
Activating the internal test procedures
155
Activating turbo control valve
156
Activating turbo control valve (VNT-regulator)
157
Activating wipers, front/rear
158
Activating/reading out components/functions
159
Activation
160
Activation and service
161
Activation brake vacuum pump
162
Activation of adaption
163
Activation of blower fan run-on
164
Activation of boot lid opening/closing
165
Activation of installation image
166
Activation of quick-lock motors.
167
Activation of the indicator for visual collision warning
168
Activation/pre-activation of Volvo On Call
169
Adaptation of differential pressure sensor particle filter
170
Adaptation of fuel pressure control valve
171
Adaptation of heated oxygen sensor
172
Adaptation of mass airflow sensor
173
Adaptation of neutral position sensor
174
Adaptation of swivel channel throttle
175
Adaptation of throttle module
176
Adaptation of turbo control motor
177
Adaption of camshafts
178
Adaption of oil level sensor
179
Adaption reset, control valve inlet (throttle)
180
Adaption turbo system
181
Add / erase keys
182
Adding/Erasing keys
183
Adjusting calculated oil level
184
Adjusting calculated oil level/oil quality
185
Adjusting parameters, ECC
186
Adjustment of deflection limit on steering
187
Airflow setting in rear passenger compartment
188
Ageuatormatic battery test
189
Bleeding the oil pressure pump
190
Calibrate all sensors, Y2 BCM
191
Calibrating internal sensors, BCM
192
Calibrating the climate control module (CCM)
193
Calibrating the exhaust gas recirculation (EGR) valve
194
Calibrating the inertial measurement unit (IMU)
195
Calibrating the occupant weight sensor (OWS)
196
Calibrating the position sensor for Bi-Xenon
197
Calibration (DSTC)
198
Claalmipbsration (only vehicles with DSTC)
199
Calibration angle sensor
200
Calibration of differential electronic module (DEM)
201
Calibration of electric rear axle drive module (IEM)
202
Calibration of high voltage generator module (IGM)
203
Calibration of iTPMS
204
Calibration of radar and camera
205
Calibration of side obstacle detection control module left (SODL)/Right (SODR)
206
Calibration, entry position
207
Camera activation, parking aid camera
208
Central lock motors, activating
209
Change volume on LDW
210
Check of the owner's manual in the vehicle
211
Check the communication with the remote control receiver.
212
Check whether PHM has Volvo On Call
213
Checking ABL function
214
Checking active grill shutter
215
Checking all antennas
216
Checking and adjusting calculated ethanol content
217
Checking and adjusting hard and jerky shifts
218
Checking and resetting the adaption for
219
Checking AUX-panel
220
Cihnejceckitnogr scommunication and control module
221
Checking current soot quantity and combustion of soot in particle filter
222
Checking door handles
223
Checking headphone socket.
224
Checking injectors
225
Checking installation, brake light switch, and brake pedal position switch
226
Checking loudspeaker element
227
Checking loudspeakers
228
Checking MOST communication
229
Checking noise from optional equipment.
230
Checking seatbelt-related components at
231
Checking the Active Noise Control (ANC)
232
Cchoelclikisingo nthe additive level
233
Checking the DC/AC converter
234
Checking the engine oil level
235
Checking the Four-C (Continuously Controlled Chassis Concept) keypad unit
236
Checking the fuel pump (FP)
237
Checking the navigation's hard disk
238
Checking the oil level
239
Checking the PAD-light
240
Checking the window in the rear door
241
Checking USB port, infotainment head unit (IHU)
242
Checking video signal (only applies vehicles with Infotainment control module, ICM)
243
Combustion of soot in the particle filter
244
Combustion of soot particles, particle trap
245
Communication on MOST
246
Compartment fan afterblow
247
Compartment fan afterblow, status
248
Control module adaptation
249
Control module, calibration
250
Cooling of the cooling system
251
Deactivation/activation of engine remote start ERS
252
Deleting phone book
253
Display of DSTC/ESC message
254
Display of oil check
255
Display of vehicle speed.
256
Ejection of key
257
Entering the engine oil level after service
258
ETM test
259
Extended diagnostic trouble code (DTC) reading
260
Extended fault-tracing for the diagnostic trouble code (DTC), Engine control module
261
Filling and bleeding the cooling system
262
Filling of fuel system auxiliary heater
263
Finding the predefined service position
264
Fuel pump activation for vehicles without fuel pump module (PEM)
265
Fuel tank system quick test
266
Identification of the heater
267
Identifying components on the LIN network that belong to the climate control system (CCM)
268
Ignition switch key position.
269
Initial adaptation
270
Initializing the front seat position
271
Initializing the window in the front door
272
Initializing the window in the rear door
273
Initiate the immobilizer control module
274
Initiating the sun blind
275
Initiation of tailgate's position
276
Initiation of tailgate's position, Power operated tailgate module (POT)
277
Initiation of the TCS switch by the tunnel console
278
Insulation measurement
279
Loading assistance adjustment
280
Manual battery test
281
OBC LED test
282
OBC Lock test
283
Open circuit on MOST-cable (only vehicles with Infotainment control module (ICM))
284
Open-circuit in the MOST cable.
285
Operating and initiating the roof hatch
286
Parking camera, activating (V40/V40 Cross Country; S60/V60/XC60 structure week 13w46-)
287
Parking camera, setting (V40/V40 Cross Country; S60/V60/XC60 structure week 13w46-)
288
Position sensor xenon lamp
289
Powering the Pedestrian Airbag system
290
Powering the SRS system
291
Pre-delivery service for new car
292
Programming and calibrating the convertible
293
Programming and reading off the programmed system values
294
Programming control module
295
Programming cruise control
296
Programming LEDs for central locking system
297
Programming loudest audible signal, seat belt reminder
298
Programming of cruise control
299
Programming of parking assistance module (PAM)
300
Programming of rear window wiper when
301
Programming of short flash sequence
302
Prerovegrrasimmnging other settings.
303
Programming parameters / functions
304
Programming parameters/functions
305
Programming remote control
306
Programming safety lighting.
307
Programming seatbelt reminder in backseat
308
Programming seatbelt reminder in front seat
309
Programming text message, seatbelt reminder
310
Programming the clock
311
Programming the cruise control
312
Programming the driver information module (DIM)
313
Programming the evaporator, climate control module (CCM)
314
Programming the gear shift indicator
315
Programming the HCM switch function
316
Programming the infotainment control module (ICM)
317
Programming the remote control
318
Programming the seat memory's delay time and acknowledgement
319
Programming the seat temperature (CEM)
320
Quick test of alternator function
321
Quick test of fuel tank system (USA/CDN)
322
Quick test of the function of the additional/parking heater
323
Quick-test injectors
324
Quick-test of EVAP-valve
325
Quick-test of HCM
326
Read out of the number of programmed remote keys.
327
Read out the stored ID numbers for the tyre pressure sensors.
328
Read-out and resetting alco-lock
329
Read-out of causes of 10 latest occurrences of blocked autostop of engine
330
Read-out of fuel volume.
331
Read-out of number of occurrences of blocked autostop of engine
332
Read-out of part number and serial number,Remote Keyless Entry (RKE)
333
Read-out of part number for Remote Receiver Module (RRX) and siren (SCM)
334
Reading alarm causes
335
Reading off alarm cause
336
Reading off alarm causes
337
Reading off and programming vehicle mode
338
Reading off blocks of diagnostic trouble codes (DTCs)
339
Reading off diagnostic data
340
Reading off IUMPR (USA/CDN)
341
Reading off power supply position
342
Reading off the configuration, MOST
343
Reading off the programmed parameters in the climate control module (CCM)
344
Reading off the result from a ring break diagnostic
345
Reading out detected/expected control modules/sensors
346
Reading out electronic damper motor, actual/preset range and tolerance limit
347
Reading out permanent diagnostic trouble codes (USA/CDN)
348
Reading VIN LEARNED
349
Reading-out programmed parameters in the climate control module
350
Readout of causes for the 10 latest occasions of blocked combustion engine operation
351
Readout of causes for the 10 latest occasions of blocked stop of combustion engine operation
352
Readout of causes for the 10 latest occasions of system requested combustion engine
353
Readout of current from battery monitoring sensor
354
Readout of information stand-by current
355
Readout of number of blocked combustion engine operations
356
Readout of number of blocked stops of combustion engine operations
357
Readout of number of occurrences of system requested autostart of engine
358
Readout of number of system requested combustion engine operations
359
Readout off
360
Rear view mirror light sensitivity.
361
Refilling the feed hose with additive
362
Reinstalling the reserve battery
363
Remote control
364
Remote controlled immobilising, cause
365
Remote controlled immobilising, status
366
Request for self-test.
367
RESET VOC BATTERY P2 PHM
368
Resetting adaptation for the compressor bypass valve
369
Resetting adaptations and wear counter for supercharger
370
Resetting adaptations for air flow measurement
371
Resetting adaptations for camshaft regulation exhaust
372
Resetting adaptations for camshaft regulation,intake
373
Resetting adaptations for cylinder balancing
374
Resetting adaptations for front heated oxygen sensor
375
Resetting adaptations for fuel flow regulation valve
376
Resetting adaptations for fuel/air mix (fueltrim)
377
Resetting adaptations for rear heated oxygen sensor
378
Resetting adaptations for rear heated oxygen sensor regulation
379
Resetting adaptations for swirl damper
380
Resetting adaptations for the diesel particle filter
381
Resetting adaptations for the EGR valve
382
Resetting adaptations for the fuel pump, low pressure side
383
Resetting adaptations for the fuel system (high pressure side)
384
Resetting adaptations for the injectors
385
Resetting adaptations for the particle filter's differential pressure sensor
386
Resetting adaptations for the throttle
387
Resetting adaptations for turbocharger control
388
Resetting counter by-passing alcolock.
389
Resetting counter for fuel ageing
390
Resetting counter for oil quality
391
Resetting counter for running time, water pump
392
Resetting counter for soot amount in diesel particulate filter
393
Resetting counter particle filter
394
Resetting crash mode
395
Resetting fuel trim for control module preheating and the glow plugs
396
Resetting information about current consumption
397
Resetting side obstacle detection control module left (SODL)/Right (SODR)
398
Resetting the "Transmission fluid change" counter
399
Resetting the camshaft adaption values
400
Resetting the clutch pedal counter
401
Resetting the counter for the particle filter
402
Resetting the counter for Transmission oil,
403
Resetting the factory settings
404
Rcehasengteting the flywheel adaptions
405
Resetting the fuel adaption values
406
Resetting the information to zero on power supply when replacing the battery
407
Resetting the information to zero on power supply when replacing the battery monitoring
408
Resetting the learned maximum opening angle
409
Resetting the odometer setting
410
Resetting the oil quality counter
411
Resetting the Service reminder indicator (SRI)
412
Resetting the service reminder lamp (SRL)
413
Resetting the tank level gauge
414
Resetting transmission fluid change counter
415
Resetting transmission oil replacement counter
416
Restart of the brake control module (BCM)
417
Restart the convertible roof module (CRM)
418
Restoring supplemental restraint system
419
Self-adjustment of the shutter motor end position
420
Service calibration, parking aid camera
421
Service check forVolvo On Call
422
Set lighting on buttons to Volvo On Call
423
Setting clock deviation
424
Setting day and night mode for the
425
Start calibration of ecu
426
Tiensstt roufm efntuaelt ifolnow regulation valve
427
Test of fuel pressure regulation, high pressure side
428
Test of fuel pressure regulation, low pressure side
429
Test of internal memory
430
Test/movement of camshaft control, exhaust
431
Test/movement of camshaft control, intake
432
Testing all indicators and lamps in the driver information module (DIM)
433
Testing all needles and lamps in the dashboard
434
Testing oil pressure control
435
Testing the fuel pressure control valve
436
Unlocking catches
437
Updating the ECC control module
438
Valve activation, shut-off unit BCM
439
Workshop test (TPMS)
Post je objavljen 07.08.2018. u 04:37 sati.