Marketing
WELDING CHECK VALVE : CHECK VALVE
WELDING CHECK VALVE : FDF SOLENOID VALVE.
Welding Check Valve
- A check valve, clack valve, non-return valve or one-way valve is a mechanical device, a valve, which normally allows fluid (liquid or gas) to flow through it in only one direction.
- Limits the flow of gas to one direction only. Use a check valve between the bubbler and generator to prevent unwanted pressure build up in the generator, and a safety against a low level bubbler. A check valve, such as used on torches, is recommended.
- A valve which will allow water to pass in one direction but will close and prevent flow (backflow) in the opposite direction.
- A valve that closes to prevent backward flow of liquid
- Forge (an article) by such means
- (weld) join together by heating; "weld metal"
- (weld) dyer's rocket: European mignonette cultivated as a source of yellow dye; naturalized in North America
- fastening two pieces of metal together by softening with heat and applying pressure
- Join together (metal pieces or parts) by heating the surfaces to the point of melting with a blowpipe, electric arc, or other means, and uniting them by pressing, hammering, etc
- Unite (pieces of plastic or other material) by melting or softening of surfaces in contact
Welded Plastic
Got the plastic hot enough to flow with a glueless glue gun.
Welded
It's an ugly weld cause I forgot to turn the gas on LOL.
Similar posts:
chicago valve company
motor valve actuator
01m transmission valve body
electric valve solenoid
diesel fuel solenoid valve
flowserve worcester valves
prv valve
water valve lock
Post je objavljen 31.01.2012. u 18:36 sati.