Make or become a different substance entirely; transform
cause to change; make different; cause a transformation; "The advent of the automobile may have altered the growth pattern of the city"; "The discussion has changed my thinking about the issue"
Make or become different
(change) an event that occurs when something passes from one state or phase to another; "the change was intended to increase sales"; "this storm is certainly a change for the worse"; "the neighborhood had undergone few modifications since his last visit years ago"
A vehicle composed of two wheels held in a frame one behind the other, propelled by pedals and steered with handlebars attached to the front wheel
ride a bicycle
a wheeled vehicle that has two wheels and is moved by foot pedals
In graph theory, a pseudoforest is an undirected graphThe kind of undirected graph considered here is often called a multigraph or pseudograph, to distinguish it from a simple graph. in which every connected component has at most one cycle.
conduit consisting of a long hollow object (usually cylindrical) used to hold and conduct objects or liquids or gases
Material in such a cylindrical form; tubing
convey in a tube; "inside Paris, they used to tube mail"
The inner tube of a bicycle tire
A long, hollow cylinder of metal, plastic, glass, etc., for holding or transporting something, chiefly liquids or gases
provide with a tube or insert a tube into
Weird twist
How could it happen? A perfect 180-degree twist? The tube untwisted itself a bit when I removed it, but the print of the rim and the spoke holes indicates that it was perfectly aligned while inside the tyre. I did have a reason to remove it. It was chewed down to a hole at the edge of the twist.
That twist was the only one. Was it my mistake? I would expect to see two twists if I twisted a section while installing the tube. If it was not my fault, and I have not changed anything when I reinstalled it today, will it twist itself again?
Weird.
Source: 110611_094700.ORF
New MTMS Phase Indexer
OK, it's not quite all there in the pic, it's missing the main pivot and the overarm that holds the mandrel bracket (shown in front of the main assembly). It will rotate 90-degrees on its main axis to keep your tube miters in phase and it adjusts to match any miter angle with dedicated quick change tube mandrels.