Given the different brands of hard disk have different failures, so to separate it, but whatever, the reason that the hard drive do not turn is almost certainly a circuit board problem, and rarely the motor bad.
MAXTOR Disk
1, Asus 1005 Disk Stop immediately after turn on , the problem is not circuit board, is the FW error , rewritten will be ok.
2, The performance parameters of confusion, in the SYSTEM CONFIGURATIONS Department is shown as NONE, ibid.
3, POST to stay for a long time at detected hard disk , but can correctly identify the drive ID, can be displayed in the SYSTEM CONFIGURATIONS at the correct capacity, 0 bad.
4, Long time can’t get into the hard disk after the Dell XPS M1210 system boot,has bad sectors (system problem is not on the table.)
5, CMOS can be correctly identified, but show 'PRI DETECT FAIL' after self-test, failed with 1.
6, POST to stay for a long time at detected hard disk, and does not recognize the hard disk ID, felt head movements, head bad or FW wrong.
7, abnormal sound after boot, you can hear a click sound, head or circuit board failure.
8, self-MODEL is garbled, and capacity does not match in the SYSTEM CONFIGURATIONS ,the circuit board failure (cable problems not on the table.)
9, LE appears recognize disk circularly, is also FW error and be rewritten.
(Continued) FUJITSU plate
1 .FUJITSU Siemens Amilo Pi 3560 Disc recognition normal, but the self-test MODEL is garbled, and the SYSTEM CONFIGURATIONS displayed NONE, FW error and rewritten will be ok.
2, disc recognition normally, self-MODEL correctly, SYSTEM CONFIGURATIONS display capacity is also correct, but can not operat under the DOS disk, such as FDISK, DM, LFORMAT etc.; FW error can be corrected.
3, POST to stay for a long time at the hard disk, but can correctly identify the drive ID, can be displayed in the SYSTEM CONFIGURATIONS at the correct capacity, 0 bad, specified : this failure can easily lead to failure 1, repair as soon as possible.
4,Even long time it can’t boot into the hard disk ,has bad sectors of non-0.
5, hard disk boot knocking, circuit board or the head or the FW issue, this failure repair rate is relatively low.
6, recognition timely, the circuit board and FW issues.
7, showing the course of knocking, circuit board or FW problem.
IBM disk
1, IBM ThinkPad X200 showing boot self-test squeak, there are two possibilities, the first bad area is 0; second circuit boards and hard body bad contact, the so-called shift circuit board problem.
2, hard disk stay for a long time at boot testing, and did not detect the hard disk, but the hard drive head movement after power on, LODER problems, some need to rewrite the FW.
3, Boot self-test not detected, no sound of head movements, but rotation, head problems.
4, motor rotating bad after power on , circuit board or motor problems.
5, head back and forth sweeping move after power on, circuit board or motor problems.
6, the process of using squeaky, hard disk has bad sectors.
7, IBM X200 hard disk have squeak sound, is the head problem.
Post je objavljen 06.04.2011. u 14:27 sati.