When you start the computer and operating system or application, operation often failed due to memory exception. I use the computer for many years, summed up the reasons for memory abnormal and gives the following treatment, and I hope to give you some reference.
Fault A: Apple A1189 memory slot is poor contact with motherboard, the memory controller fails as follows: When system turned on, the screen shows "Error: Unable to ControlA20 Line"and crash.after error message
Solution: carefully check whether the memory slot good contact with maintain or replace the memory.
Failure B: self-test passed. In DOS mode , because of the memory address conflicts when run the application, resulting in memory allocation error, the screen appears "Memory A11ocationError" prompt.
Solution: Because Dell XPS M1210 Confis.sys file have not use Himem.sys, Emm386.exe memory management file for setting memory or set incorrectly, making the system can only use 640KB base memory, running larger programs will appear "Out of Memory "(memory) prompt, can not operate. These phenomena are soft fault, after redact system configuration files Config.sys, restart the system will be ok.
Fault c: Windows applications running on the system of illegal access memory, too many applications in presence of memory, too many active window, unreasonable application configuration file and other reasons related can result in a number of error message about memory .
Solution: Such failure must clear the memory-resident programs ,to reduce the active window, adjust the configuration file (INI), reinstall the system and applications and other ways to deal with.
Four failures: Asus Eee PC 1005 Windows systems running applications under DOS (such as game software running under DOS, etc.), because the software allocated between them,the conflict occupation memory and appear black screen, crash phenomenon.
Solution: Exit Windows systems, enter the DOS state, and then run the application.
Failure E: That such as Dell Studio 1555 program IN virus, the virus-memory, CMOS parameter values in the size of the memory modified by virus and so on will cause the memory value does not match the actual memory size, memory, and work exceptions.
The solution: use antivirus software to eliminate the virus; CMOS parameters modified by the virus, the first short circuit CMOS for discharge, restart the machine and enter CMOS , careful examination the hardware parameters , set on the memory parameters correctly.
Failure F: FUJITSU SQU-809-F01 memory upgrades for expansion, memory have chosen not compatible with the motherboard.
Solution: First, upgrade the motherboard BIOS, see if we can solve the problem, if to no avail, have to replace the memory.
Post je objavljen 02.04.2011. u 15:03 sati.