jpalice

New arrivals Cheap Dell AC350AM-00 350W Power Supply Dell XPS 8920 8910 8500 8700

srijeda , 28.08.2019.

New Specials Dell AC350AM-00 POWER SUPPLY 350W for Dell XPS 8920 8910 8500 8700. 100% compatible, quality guaranteed. 1-year warranty, 30-days money-back.

Brand : Dell power supply

Input Voltage : 350W

Out Voltage : 100-240V~/5A 50-60 Hz

AC350AM-00 replacement model

L350AM-00 PS-6351-6DF AC350AM-00 15D8R

Compatiblet with Dell XPS 8920 8910 8500 8700:

SWITHING POWER SUPPLY
SHALL NOT EXCEED 350W
350W Power supply
Model: L350AM-00
P/N: PS-6351-6DF
Connectors
(1) 24 Pin Power Connector
(1) 4 Pin Power Connector
(1) SATA Connectors
(1) Mini SATA Connector
(1) 6 Pin PCIe Power Connector

For Dell XPS 8910 8920
For Dell XPS 8000 8100 8500 8700

IT : Alimentatore Dell AC350AM-00

DE : Dell AC350AM-00 PC-Netzteil

JP : °Á’Ű(Dell AC350AM-00Ń˝łóű
UK : Replacement power supply Dell AC350AM-00
ES : Adaptador del Dell AC350AM-00

https://www.batteryclub.org/Goods/DEL17628_SE_1-AC350AM-00-Dell-Adapter.html

How to maintain Dell AC350AM-00 computer power supply

1. Remove the fan. Disconnect the main power supply first, and unplug the input and output cables on the back of the power supply. Next, unplug and connect all the accessories connected to the power supply, remove the fixing screws of the power supply box, and take out the power supply box. Observe the appearance of the power supply box, remove the screws reasonably and accurately, and remove the cover. When taking the cover, the wires should be pulled out according to the gap at the same time. Remove the four screws that secure the fan and remove the fan. You can not solder the two power cables temporarily.
2. Clean the dust. After separating the power supply board and the fan with cardboard, use a small brush or a damp cloth to wipe the dust and wipe it clean. It is also possible to use dust from the fan to blow fan blades and bearings.
3. Add lubricant. Peel off the sticker and use a needle-nose pliers to pick out the rubber seal. Find the motor bearing, add lubricant, and when you use the fan to move the fan, make the lubricant flow evenly along the bearing, then add a few drops. Pay attention to whether the fan of the ball bearing has two bearings. Don't neglect the oil feeding to the bearing on the wind side. The oil can't be placed on the main shaft only. Lubricating oils must use computer-specific lubricants or advanced lightweight sewing machine oils. Never use the lubricants used in automobiles. Finally, install the rubber sealing sheet and label it.