How to Remove Nail Gun Nails
četvrtak , 04.04.2019.Putting a nail through a nail gun is pretty easy. Have you ever think of putting a nail into a wrong place or you made a mistake! What will happen then? The answer is simple you have to remove the nail from that place or surface. Removing nail gun nails should be easy too, but if someone says remove the nail without damaging the surface or wood. In that case, the job will be difficult. You have to be careful and serious, when you remove the nail gun nails. There are several ways to remove a nail gun nail. To remove those nail you will need some tools. In this article you will know the ways to remove nail gun nails and tools you needed. To see its features, follow senco cordless finish nailer reviews.
Tools you Need to Remove the Nail
- End-cutting Pliers
- Putty Knife
- Hammer and
- Hand Drill
- Delicate Trims
You can use all of those four tool to remove the nail in four different ways.
Remove with End-cutting Pliers
This method is used to pull nails form a drywall quickly. First, use the end-cutting pliers to hold the nail head. Then carefully rock the nail to and fro. You will see the nail is coming out from the drywall. As the nail is sliding out of the wall, make sure you secure the end-cutting plier closer to the surface. Keep going with rocking motion until the nail comes out fully.
Removing through Putty Knife and hammer
You can use this method if you don’t have any end-cutting pliers. First, put the putty knife between the drywall and nail head. Next, hold the nail head with a hammer’s claws and gently pull the head of the nail. Putty knife is used in this method to make sure hammer’s metal does not cause any damage on surface while pulling the nail.
Using Hand Drill to Remove a Nail
Using a hand drill is the easiest way to remove a nail. First of all, you have to remove the drill bit from the adjustable chuck. After that align the chuck and on the head of the nail and tighten it firmly. Now pull out the nail by setting the hand drill in reverse.
Removing with Delicate Trims
In this process, you will also need an end-cutting plier. In the beginning use the plier to cut off the nail head. After you done with cutting the nail head grip the nail from behind the trim and try to pull the nail out of the wood or surface.
One can use any of the processes to remove nail gun nails without damaging the project or the surface wall. In some cases, the job will be very difficult if the nail is broken and stuck in the wood. In that case there is no other ways to remove the nail and you have to leave the nail in the wood. So, while nailing make sure you use a good thick nail, so that you can pull it out if you make any mistake.
komentiraj (0) * ispiši * #