Using outdoor power sources faces many risks. In this article we only mention electrical sockets, other components of course also need to ensure safety criteria. Requirements for safety, contact size, pin pressure, exposed protective foil... theo ocamchongnuoc.vn Not to mention that in each country, sockets need to comply with certain plug types, voltages and materials. Outdoor power outlets need more than those requirements.

What are the requirements for outdoor sockets?

Using outdoor power sources faces many risks. In this article we only mention electrical sockets, other components of course also need to ensure safety criteria. In addition to international standards applicable to conventional electrical outlets. Outdoor power sockets need the following criteria:
- Waterproof features: IPX4, IPX5, IPX6 ( readmore about IP54 for socket ( xem thęm: Ő cŻm điÇn IP54 ) )
- Use a safe and grounded plug
- It is best to integrate an anti-shock unit at the power source
- Install in a safe location: high altitude, avoid wet areas and heat factors...
- GFCI standards should be applied.

Notes when installing outdoor power sockets

Choose a suitable installation location

In Vietnam's weather conditions with high humidity and frequent rainstorms, when installing an electrical switch, you should choose the most suitable installation location. Normally, the power switch should be installed in a high position to avoid wet places to protect electrical equipment and at the same time help keep users safe. Use electrical cabinets to protect electrical equipment such as switches and switchgear. xem thęm tˇi : https://ocamchongnuoc.vn/san-pham/o-cam-chong-nuoc-ngoai-troi-3-lo-cao-cap/

Choose installation time

The most favorable time is to install during the day, when the weather is nice and there is no rain. Many outdoor accidents can occur because people handling equipment are careless or do not follow the manufacturer's instructions. By following simple safety rules you can easily avoid serious accidents every time you work with outdoor electrical equipment.

note :

Use a residual current device (RCD) for all outdoor electrical equipment, and use the test button regularly to check that it is operating correctly.

Check electrical equipment, including the plug and extension leads, for damage before you use it.
Replace damaged cables and plugs before you use the appliance.

Buy good quality electrical equipment from a reputable manufacturer.

Wear protective clothing and footwear.

Be careful when you are digging down, electricity, gas and water lines may be buried underneath.

Follow the manufacturer's instructions – many accidents happen if safety instructions are ignored.

Store electrical equipment in a dry place, out of reach of children.
source : CheepMe