AIR VACUUM VALVES

• Photo © by ARTAMIA: Ferrari P4/5 by Pininfarina at 2006 Pebble Beach Concours,
Monterey Bay Peninsula, California, USA.

• The FERRARI P4/5 was publicly revealed on August 18, 2006 at the Pebble Beach
Concours d'Elégance and shown again at the Paris Motor Show in late September.

• Specifications

• The Ferrari P4/5 can accelerate from 0-100 kilometres per hour (0-62 mph) in 3.0 seconds (0.5 seconds quicker than the Enzo). It has a top speed of 233 mph (375 km/h). The car has a frontal area of 1.906 square metres (20.52 sq ft), but the sharp nose and smooth curves mean it has a drag coefficient of only 0.34.

• Upon seeing P 4/5 Luca di Montezemolo felt that the car deserved to be officially badged as a Ferrari and along with Andrea Pininfarina and James Glickenhaus agreed that its official name would be "Ferrari P 4/5 by Pininfarina". Ted West wrote an article in Car and Driver about how this came to be "The Beast of Turin".

• On September 2009, Glickenhaus announced his intention to race a new version of the P4/5 in the 2010 24 Hours Nürburgring. The car, called the P4/5 Competizione, would not be a conversion of his road car but instead an entirely new car with a Ferrari chassis, VIN number and drivetrain. On May 2010 however, it was revealed that the Competizione would in fact be raced in 2011, based on a 430 Scuderia. It would be built to FIA GT2 standards and raced by Scuderia Cameron Glickenhaus in an Experimental Class under the direction of Paolo Garella, former Head of Special Projects at Pininfarina.

• Chassis
Much of the suspension was unchanged from the original Enzo, with the same double wishbone suspension at the front and rear, and the same Brembo carbon-ceramic anti-lock disc brakes with diameter of 340 millimetres (13.4 in) at the front and rear.[1] The aluminium alloy wheels are 510 millimetres (20 in) in diameter, the front tyres have codes of ZR 255/35 and the rear, ZR 335/30.

• Exterior
The exterior of the car is made entirely of carbon fibre reinforced plastic and is similar in shape to the Ferrari 330 P4 as Glickenhaus requested, however it has been called a "rolling history of Ferrari-racing-DNA" sharing elements from several historic Ferrari vehicles, not just the 330 P4. The rear window is similar to that of the Ferrari 512S, the side vents are similar to the Ferrari 330 P3 and the nose is similar to that of the Ferrari 333 SP which improves cooling and the car's frontal crash safety. The butterfly doors (similar to those of the McLaren F1) are designed such that even at 160 mph (260 km/h) there is no wind noise. The improved aerodynamics have proven themselves, giving the car greater downforce at the same time as less drag than the Enzo also making the car more stable than the Enzo at high speeds.

• Powertrain
The P4/5 has the same engine as the Enzo Ferrari it was built on, a 65° Dino F140 V12. The 12 cylinders have a total capacity of 5998 cubic centimetres, each with 4 valves. The redline rpm at 8200 and the torque of 485 lb·ft (658 N·m) at 5500 rpm are both the same as the Enzo, but it produces marginally more power with 660 brake horsepower (492 kW) at 7800 rpm. The P4/5 uses the 6 speed semi-automatic transmission of the Enzo with black shifting paddles behind the wheel. It has two directional indicator buttons, one mounted on each side of the steering wheel.

• The Ferrari P4/5 (officially known as the Ferrari P4/5 by Pininfarina)
is a one-off sports car made by Italian sports car manufacturer Ferrari but redesigned by Pininfarina for film director and stock exchange magnate James Glickenhaus. The car was an Enzo Ferrari but the owner James Glickenhaus preferred the styling of Ferrari's 1960s race cars, the P Series. The project cost Glickenhaus US$ 4 million and was officially presented to the public in August 2006 at the Pebble Beach Concours d'Elégance, but in July 2006 Glickenhaus allowed several websites to publish images of the clay model.

• Development
On March 2005 James Glickenhaus, stock exchange magnate and known car collector, was approached by Pininfarina who asked if he was interested in commissioning a one-off car. Andrea Pininfarina, grandson of the company’s founder later said "The Ferrari 612 Kappa and this P4/5 are the first. But we want to grow this business." indicating that Pininfarina is interested in producing other unique cars. Glickenhaus replied that he would like a modern Ferrari P, and in June of that year he signed a contract with Pininfarina to produce the car including the price, approximately US$4 million though in an interview he said "I feel they gave me more than I expected". Glickenhaus purchased the last unsold Enzo Ferrari and upon receipt of the car he took it to Pininfarina to be redesigned similar to his 1967 Ferrari 330 P 3/4 chassis 0846 which he also delivered to Pininfarina. Pininfarina's styling team leader, Ken Okuyama said that

• Photography © by Artamia.
• Ferrari P4/5 by Pininfarina at 2006 Pebble Beach Concours, USA. • Concours d'Elegance, Pebble Beach, California, USA • Monterey Bay Peninsula: Pebble Beach Resort and Golf Co. California Central Coast •

• The FERRARI P4/5 was publicly revealed on August 18, 2006 at the Pebble Beach Concours d'Elégance and shown again at the Paris Motor Show in late September.

• Specifications

• The Ferrari P4/5 can accelerate from 0-100 kilometres per hour (0-62 mph) in 3.0 seconds (0.5 seconds quicker than the Enzo). It has a top speed of 233 mph (375 km/h). The car has a frontal area of 1.906 square metres (20.52 sq ft), but the sharp nose and smooth curves mean it has a drag coefficient of only 0.34.

• Upon seeing P 4/5 Luca di Montezemolo felt that the car deserved to be officially badged as a Ferrari and along with Andrea Pininfarina and James Glickenhaus agreed that its official name would be "Ferrari P 4/5 by Pininfarina". Ted West wrote an article in Car and Driver about how this came to be "The Beast of Turin".

• On September 2009, Glickenhaus announced his intention to race a new version of the P4/5 in the 2010 24 Hours Nürburgring. The car, called the P4/5 Competizione, would not be a conversion of his road car but instead an entirely new car with a Ferrari chassis, VIN number and drivetrain. On May 2010 however, it was revealed that the Competizione would in fact be raced in 2011, based on a 430 Scuderia. It would be built to FIA GT2 standards and raced by Scuderia Cameron Glickenhaus in an Experimental Class under the direction of Paolo Garella, former Head of Special Projects at Pininfarina.

• Chassis
Much of the suspension was unchanged from the original Enzo, with the same double wishbone suspension at the front and rear, and the same Brembo carbon-ceramic anti-lock disc brakes with diameter of 340 millimetres (13.4 in) at the front and rear.[1] The aluminium alloy wheels are 510 millimetres (20 in) in diameter, the front tyres have codes of ZR 255/35 and the rear, ZR 335/30.

• Exterior
The exterior of the car is made entirely of carbon fibre reinforced plastic and is similar in shape to the Ferrari 330 P4 as Glickenhaus requested, however it has been called a "rolling history of Ferrari-racing-DNA" sharing elements from several historic Ferrari vehicles, not just the 330 P4. The rear window is similar to that of the Ferrari 512S, the side vents are similar to the Ferrari 330 P3 and the nose is similar to that of the Ferrari 333 SP which improves cooling and the car's frontal crash safety. The butterfly doors (similar to those of the McLaren F1) are designed such that even at 160 mph (260 km/h) there is no wind noise. The improved aerodynamics have proven themselves, giving the car greater downforce at the same time as less drag than the Enzo also making the car more stable than the Enzo at high speeds.

• Powertrain
The P4/5 has the same engine as the Enzo Ferrari it was built on, a 65° Dino F140 V12. The 12 cylinders have a total capacity of 5998 cubic centimetres, each with 4 valves. The redline rpm at 8200 and the torque of 485 lb·ft (658 N·m) at 5500 rpm are both the same as the Enzo, but it produces marginally more power with 660 brake horsepower (492 kW) at 7800 rpm. The P4/5 uses the 6 speed semi-automatic transmission of the Enzo with black shifting paddles behind the wheel. It has two directional indicator buttons, one mounted on each side of the steering wheel.

• The Ferrari P4/5 (officially known as the Ferrari P4/5 by Pininfarina)
is a one-off sports car made by Italian sports car manufacturer Ferrari but redesigned by Pininfarina for film director and stock exchange magnate James Glickenhaus. The car was an Enzo Ferrari but the owner James Glickenhaus preferred the styling of Ferrari's 1960s race cars, the P Series. The project cost Glickenhaus US$ 4 million and was officially presented to the public in August 2006 at the Pebble Beach Concours d'Elégance, but in July 2006 Glickenhaus allowed several websites to publish images of the clay model.

• Development
On March 2005 James Glickenhaus, stock exchange magnate and known car collector, was approached by Pininfarina who asked if he was interested in commissioning a one-off car. Andrea Pininfarina, grandson of the company’s founder later said "The Ferrari 612 Kappa and this P4/5 are the first. But we want to grow this business." indicating that Pininfarina is interested in producing other unique cars. Glickenhaus replied that he would like a modern Ferrari P, and in June of that year he signed a contract with Pininfarina to produce the car including the price, approximately US$4 million though in an interview he said "I feel they gave me more than I expected". Glickenhaus purchased the last unsold Enzo Ferrari and upon receipt of the car he took it to Pininfarina to be redesigned similar to his 1967 Ferrari 330 P 3/4 chassis 0846 which he also delivered to

<< Arhiva >>