Pregled posta

Marketing

Polk Audio SurroundBar 50 Surround System (Single Speaker, Black)

The Polk Audio SurroundBar 50 is 51" wide to offer an enveloping surround sound experience to anyone who wants better sound from their TV but does not want to install rear-mounted speakers. It delivers surround sound from a single, multi-driver loudspeaker located under or over the TV screen using SDA Surround technology. SDA Surround technology uses a patented combination of signal processing and acoustical geometry that complements the spacing between your ears to produce surround sound without the need for rear mounted speakers. It can deliver a room-filling surround experience in nearly any location in almost any type of room with no special room characteristics required. The SurroundBar 50 is sized to match the width of 50" Plasma and LCD TVs. In addition to using SDA Surround technology on the surround channels, the SurroundBar 50 adds SDA Surround image enhancing technology on the front Left & Right channels to further enhance the surround experience as well as produce a huge stereo sound field from a two-channel source. New drivers and crossover design along with a larger enclosure produce far better bass performance than the original SurroundBar. The aluminum enclosure houses nine mid/bass drivers with Neodymium magnets, three dome tweeters and a four-PC board crossover with over 60 components.

So. I painted my living room this weekend....

It's not especially hard to do all this, honestly.
1: Paint the base coat. This should be the color you want the stripes.
2: After the base coat dries, tape the lines you want on your wall - either straight or crazy style like I did. :)
3: Take the same color you used for the stripes and carefully paint the edges of the tape. This seals the tape to the wall so the next coat doesn't leak.
4: Paint the whole wall, tape and all, with the "background" color you chose. Two coats is as very good idea.
5: After the paint dries - really give this 12 hours minimum - carefully remove the tape.
6: To clean the edges, take the stripe color again and gently push it into the edges of the "background" color. The two coats of that color have built a small ridge around the stripes so you can just carefully push paint in there. If you waited a day or two for the stripe color to dry, this step will be minimal effort.

ABMann.net

I cleaned my apartment because I had friends visiting today. Actually, most of the stuff that was in this room is in the back room (the door is closed, it has the shoe rack hanging on it, on the far right of the photo).

I like it better this way, empty, sparse, spare. If only I could keep it this way.