A product made by bonding layers of wood or other material to a wood substrate.
dismiss: bar from attention or consideration; "She dismissed his advances"
A percentage deducted from the face value of a bill of exchange or promissory note when it changes hands before the due date
the act of reducing the selling price of merchandise
A deduction from the usual cost of something, typically given for prompt or advance payment or to a special category of buyers
give a reduction in price on; "I never discount these books-they sell like hot cakes"
A level area or space used or designed for a particular activity
The lower surface of a room, on which one may walk
shock: surprise greatly; knock someone's socks off; "I was floored when I heard that I was promoted"
All the rooms or areas on the same level of a building; a story
the inside lower horizontal surface (as of a room, hallway, tent, or other structure); "they needed rugs to cover the bare floors"; "we spread our sleeping bags on the dry floor of the tent"
a structure consisting of a room or set of rooms at a single position along a vertical scale; "what level is the office on?"
*** Hole Cutter may be damaged by nail strikes *** Blue Boar Self-Feed Multipurpose TCT tungsten carbide hole cutters with 2-1/4" cutting depth are perfect for cutting hard and soft woods, laminates, acrylics and plastics, plaster, OSB, MDF, fiberglass, chipboard, sheetrock, Hardie fiber cement board, plywood, chipboard, and fiber reinforced composites. **** These TCT hole cutters will outperform and outlast dozens of ordinary self-feed bits (and without the mess) or bi-metal hole saws (without the time lost prying out the cut plugs). Use a single hole cutter for every material on the job site. Aggressive cutting tips and the ability to cut almost every building and construction material makes short work of any project. The rake of the TCT teeth and the drop shaped chip clearance slots allow for easy removal of plugs making for an uninterrupted drilling process The 2-1/4" cutting depth enables its use for cutting through strapping and joists without ship auger drill bits. Quickly mounts to any standard 3/8" arbor or the Hole Pro XL Arbor for use with Hole Pro dust shields to trap the dust and shavings and control the cutting depth. *** The design of these TCT hole cutters enables drills rated for 3" maximum hole sizes in wood when using a bi-metal hole saw, can easily cut holes up to 6-1/4" diameter in the same materials using the Blue Boar TCT hole cutter. *** Use with any 2-pin style hole saw arbor with 5/8"-18 thread ** For NAIL FREE materials ***