Three Shenzhen PCBA companies with matching price and quality

ponedjeljak , 06.02.2023.

Perhaps the era of China's PCBA industry has finally arrived. As we all know, in the PCB field, the United States is actually the first to develop PCBA business, and they almost occupy the global high-end PCB manufacturing and assembly market. With the rise of China's manufacturing industry, electronic products made in China are leading the world. According to the report of Central Finance and Economics, since 2014, China's PCBA industry has been developing rapidly, and now it has occupied 50% of the global market. In this article, we will introduce the list of PCB manufacturers in China. These companies are all PCBA processing factories with matching price and quality.

FS Technology

For electronics manufacturers who are familiar with the Chinese market, I believe you must know FS Technology, which is a skilled PCBA company. Since the establishment of a special economic zone in 1974, Shenzhen's foreign trade has increased rapidly. FS Technology was established in 2000. Due to its skilled assembly technology and advanced management concepts, FS Technology has been supported by the Shenzhen government and has become a leading enterprise in Shenzhen PCBA.

Why choose FS Technology? You can get the answer to this question from their website fs-pcba.com. This company has a strong service concept and management concept, and uses modern management methods to manage the employees in the assembly workshop. Compared with other PCBA processing factories of the same type, FS Technology mainly focuses on service quality.

In order to ensure the PCBA quality that satisfies customers, FS Technology strictly implements IPC PCB standards and unswervingly completes customer orders. They are responsible for all projects, whether series or prototype. It is hard for you to imagine that a PCBA manufacturer can set up manual inspections in every link of production and assembly. These personnel responsible for inspections have many years of experience in PCBA production and are rare talents. In addition to manual inspection, they have advanced PCB assembly testing equipment such as XRAY, AOI inspection, etc.

Excellent services available:

High Speed SMT Service
Fully automatic DIP assembly service
Design and modify circuit layout
Comprehensive PCB Manufacturing Services

PCBMay

PCBMay is a PCB manufacturer located in Guangming District, Shenzhen. The company's main business is the manufacture of advanced PCB boards, including high-density interconnect PCBs and multi-layer circuit boards with 1-50 layers. Compared with other companies, this company can provide services that match the price, that is, it is expensive but worth it.

While they specialize in PCB fabrication projects, electronic assembly jobs are also catered for. The company can provide SMT assembly services and cooperate with a large number of advanced PCBA processing plants. These processing plants have as many as 35 SMT assembly lines, which can complete a large number of orders in the shortest time.

China PCB One

ChinaPCBOne is located in Bao'an District, China. The company provides one-stop PCB services including - Multi-Layer PCB Fabrication, Turnkey PCB Assembly Services, PCB Prototyping, Small and Medium Volume Production, PCB Design, Component Sourcing, etc. Official website

Oznake: PCB, pcba

Clean excess flux from PCB

subota , 17.09.2022.

Flux is a common chemical used by PCB assembly companies, do these substances need cleaning? How to clean flux on PCBA board? FS Technology will introduce you in detail.

Whether cleaning flux is required

The answer given by FS Technology is: it needs cleaning, and it needs to be thoroughly cleaned, whether it is before or after welding. The following are the reasons why FS Technology believes that cleaning the circuit board flux is required.

Make the circuit board beautiful

If you are also a turnkey PCBA assembly company, then you must know that the aesthetics of the circuit board determines whether your customers will buy circuit boards from your company next time. Customers will subconsciously think that a beautiful circuit board is the result of your hard work. If the PCB flux is not cleaned in time, it will produce clearly visible oil stains and other dust residues at the solder joints of the circuit board. The reason for this phenomenon is that the flux has adsorptive properties, which will adsorb the dust and powder in the air to the PCB board. You don't need to worry about these issues if you are buying turnkey PCB assembly services from FS Technology. Our services range from design to production to cleaning and testing, and every process has a quality control link. If the cause of the flux residue is due to the rework process, it will be seen as a faulty tag in the reworked area and cause attention to the job even if it shouldn't.

Helps improve PCB reliability

It is most important for customers to choose a company that can provide high-quality circuit boards. The reliability of the PCB can determine the quality of the final product. For a company like FS Technology that can achieve mechanical assembly, the quality of the circuit board is particularly important. For most EMS providers, customers cannot directly observe the circuit board, but observe its working level from the product performance. Therefore, these mechanical assembly companies are very perfunctory in the cleaning of circuit boards, which will make the product potentially short-circuit risk. To this end, FS Technology will be responsible for every product we produce, whether your product is a computer keyboard or an electronic medical pacemaker. From the perspective of customers, we provide customers with the most affordable products while ensuring product quality.

Cleaning can place components and PCBs from being corroded

Flux is an acidic chemical. Metal products are known to corrode when exposed to acids. If we do not even clean the circuit board, the flux remaining on the PCB will absorb the moisture in nature and corrode the leads and contacts of the PCB components. It is an irreversible damage to a fragile product such as a circuit board.

High requirements for products in specific industries

As we all know, today is the era of electronic products, and circuit boards, as the core of electronic products, have played a vital role in the development of the modern electronics industry. It can be said that today's electronic products are inseparable from circuit boards. For some specific industries, cleaning the PCB is a must. In medical, automotive, aerospace, military and other high-tech fields, they control the quality of products very strictly. Even in very harsh environments, PCBA boards do not allow errors. Therefore, when manufacturing these products, we It is not only necessary to clean the bare board to remove the flux, but also the cleaning of the PCB components should not be sloppy.

Enhanced adhesion of PCB protective coatings

Most turnkey PCB assembly companies know that when repainting the board, surface cleaning needs to be done, even if the board is absolutely clean. The same logic applies to conformal coatings, even if the contamination comes from no-clean flux, if there is a stain on the surface of the board that can cause the paint applied to it to peel off. "No-clean" refers to the amount of ionic material left behind after soldering. It doesn't matter if the coating sticks or not.

Avoid potential PCB risks

Professional PCB assembly companies believe that cleaning must be better than not cleaning. Harmful encapsulation residues from the soldering process may be released from the rosin/resin when we clean the board that needs to be assembled. Yes, it's the white residue that appears after cleaning. These substances are hazardous waste that will put your board at potential risk.

Dendrite growth occurs when placing PCB

There are polar particles in flux residues, when your board is exposed to air, it absorbs moisture, and due to the potential difference in the PCBA, negative ions move through the potential difference, creating an electrical current. Electric currents form chains or branches that connect into dendrites. These humble, snowflake-like crystals are highly conductive. When we enable the board, unintended traces are formed that can cause current to leak, or even short circuits for extended periods of time. If you think it is troublesome to clean the pcb flux, FS Technology recommends that you use no-clean flux. This type of solution has less ionic content, and when in the reflow stage, the negative ions are consumed due to the high temperature.

How to Clean PCB Flux

In the above article, FS Technology introduced you to the harm that unclear flux will bring to the circuit board, then in the following article, we will tell you how to thoroughly clean these residues.

Manually remove flux from PCB

Manual cleaning is a tedious task, which neither requires the use of advanced instruments nor professional cleaning knowledge. You need to be equipped with a solution of cleaning PCB flux and apply it to the circuit board that needs to be cleaned, after standing for a while, gently sweep away the residue with a clean brush. This process is long and requires a lot of patience. Of these we recommend Flux Remover 4, which uses an ESD wipe to clean all flux residues from the board. Flux Remover 4 is an alcohol-based cleaning fluid designed for manual PCB cleaning, and in past experiments we have found that it cleans most flux residues. Also, it is an expert on other pollutants. If you want to know more about PCB flux removal, you can come to FS Technology's pcba knowledge blog website to inquire.

Machine cleaning

As the name implies, manual cleaning is done by ourselves, while machine cleaning is the use of professional and advanced PCB cleaning equipment. These cleaning machines have a large number of cleaning systems that can specialize in cleaning flux residues, large particles of trash, small particles of dust, and more. The use of a machine can quickly and effectively carry out a comprehensive cleaning of the circuit board.

Cleaning reworked circuit boards

After the circuit board is damaged due to transportation or other reasons, FS Technology supports after-sales service, which most turnkey PCB assembly companies cannot do. After receiving the reworked PCB, we will conduct a PCBA failure analysis, find the cause and clean it first, and then repair it. FS Technology's most common method of cleaning reworked boards is to soak a cotton swab or foam swab with isopropyl alcohol or other cleaning solvent and wipe around the repaired area. This not only ensures that the circuit board is visually clean, but also makes subsequent maintenance work easier.

The cleaning content of the flux is probably here. If you are interested in the knowledge of circuit boards, you can go to the FS Technology PCB blog.

Oznake: PCB flux

PCB Repair Tips - FS Technology

petak , 17.06.2022.

Many people do not know much about the maintenance of circuit boards. Next, FS Technology will explain the maintenance skills of PCBs.
1. Observation method
When we receive an FS Tech PCB for repair, we first take a closer look at what it looks like. If the PCB is burnt, please confirm that the power supply PCB is normal before turning on the PCB, and then turn it on again to ensure that no secondary damage will be caused. The observation method is a static verification method, when using the observation method, the following steps are usually followed.

Step 1: Check whether the PCB is artificially damaged;

Step 2: Check whether the PCB components are burned out;

Step 3: Test the integrated circuits in the PCB;

pcb repair

Step 4: Check the chain for loose, burnt or damaged caterpillars. It is a copper hole that sinks from the platform;

Step 5: Check the fuses (including fuses and thermistors) in the FS Tech PCB to make sure the fuses are not blown. Sometimes the fuse is too thin to see, and auxiliary equipment such as a multimeter can be used to determine whether the fuse is damaged.

2. Fixed measurement method
For most printed circuit boards, previous methods of observation do not detect problems. Although a small number of PCBs may be physically deformed for some reason, the cause of the failure is not difficult to determine. point on the graph. Methods of measuring, identifying and solving problems.

Before measuring, first determine whether the circuit is controlled by an analog or digital signal. The following are just standard methods for measuring digital circuits, and management basically follows the steps below.

Step 1: Use a multimeter to check whether there is a short circuit between the power supply and the ground;

Step 2: Measure the diode with a multimeter and check that it is working properly;

Step 3: Use a resistance multimeter to measure the capacitance to see if it is a short circuit or an open circuit. If there is, it means that there is a problem with this part of the FS technology circuit. The unit or circuit associated with it. ;

Step 4: Measure integrated circuits, transistors, resistors, etc. with a multimeter. In the PCB, see if they match their own logic characteristics

Circuit board maintenance skills

Tips and Warnings Most PCB management issues can be resolved by reviewing both observational and static measurement methods. Remember that the power supply must be normal, so as not to damage the secondary circuit after the next step.

3. Network measurement method
The Internet measurement method is commonly used by manufacturers who produce PCBs in series. . Internet measurement methods basically solve two problems. The first is to isolate the problems found in the first two steps, and finally the problematic components are eliminated. Second, in the above two-stage test, the problem is not resolved, so the cause of the failure must be determined through Internet measurements. The Internet measurement method is mainly used to compare two good and bad PCBs, through which problems can be found and solved.

Oznake: pcba