ALLOY WHEEL LOCKING NUTS : FRONT WHEEL BEARING HUB ASSEMBLY.



Alloy Wheel Locking Nuts





alloy wheel locking nuts






    locking nuts
  • (Locking nut) A locknut, also known as a lock nut, locking nut, prevailing torque nut,. stiff nut or elastic stop nut,Smith, p. 104. is a nut that resists loosening under vibrations and torque.

  • (Locking Nut) Bolts that lock the strings in place at the nut.

  • (Locking Nut) This is commonly the nut that secures a tap to the surface of the basin/bath or sink.





    alloy wheel
  • Car wheels made of aluminium, rather than steel. Main advantages include lighter weight and attractive styling. Mostly chosen for style reasons.

  • Alloy wheels (incorrectly known as rims) are automobile (car, motorcycle and truck) wheels which are made from an alloy of aluminium or magnesium (or sometimes a mixture of both). They are typically lighter for the same strength and provide better heat conduction and improved cosmetic appearance.

  • (Alloy Wheels) A term used to describe any non-steel road wheel. The most common alloy wheels are cast aluminum. Technically, an alloy is a mixture of two or more metals. These wheels are known for their light weight and strength.











Put the support plate back and tighten the lock nut




Put the support plate back and tighten the lock nut





To make the bolt drop all the way down and lodge itself in the chassis I had to push and pull on the subframe, raise the sagging differential a bit, and then hammer away on the knurled bolt head from inside the car; otherwise the bolt would just turn on its axis. I couldn't find out if the nut was supposed to be a single-use self-locking nut so I used some red Loctite and 120 foot-pound of torque. I found the number somewhere on the forum; it may not be accurate, but the Bentley does not say anything about the subframe, so there...

Notice the healthy gap between the support plate and the bushing. It will become smaller when the car is back on the ground.











VMS light weight wheel nuts




VMS light weight wheel nuts





Got these on my OEM wheels, Can't believe how light they are.
I have had to fit some adapters which look like normal washers so that these nuts can hold the OEM wheels properly. :D










alloy wheel locking nuts







Similar posts:

remove front wheel bearing

free hot wheels games for kids

mkw wheels

18 wheels of steel pedal to the metal cheats pc

bbs wheels uk

new hot wheels tracks

18 wheels of steel for vista

average cost of wheel alignment




- 11:26 - Komentari (0) - Isprintaj - #

<< Arhiva >>

  listopad, 2011  
P U S Č P S N
          1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31            

Listopad 2011 (18)

Dnevnik.hr
Gol.hr
Zadovoljna.hr
OYO.hr
NovaTV.hr
DomaTV.hr
Mojamini.tv

17 OFF ROAD WHEELS
17 off road wheels, medicine wheel pictures, 8 inch buffing wheel, foo fighters wheels come down, sport truck wheels

Blog.hr koristi kolačiće za pružanje boljeg korisničkog iskustva. Postavke kolačića mogu se kontrolirati i konfigurirati u vašem web pregledniku. Više o kolačićima možete pročitati ovdje. Nastavkom pregleda web stranice Blog.hr slažete se s korištenjem kolačića. Za nastavak pregleda i korištenja web stranice Blog.hr kliknite na gumb "Slažem se".Slažem se